| 30-2181 | 30-2261 | 30-2341 | 30-2421 | 30-2501 | 30-2580 | 30-2660 | 30-2740 |
| 30-2221 | 30-2301 | 30-2381 | 30-2461 | 30-2541 | 30-2620 | 30-2700 |
 |
| HAM 30-2461 solid carbide deep hole drill 25 X D |
|
Engineering data
• special 4-facet ground • special point ground • special chip flute geometry • 4 guide chamfer |
 |
| Material |  |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|||
| 30-2461 | |||||||||||||
| very suitable | limited suitable | ||||||||||||
 cutting materialsolid carbide ultra micro grain |
 number of teeth - 2 |
 helix angle30° right hand fluted |
 HAM Standard |
 25 x Diameter |
 HAM Standard |
 Point angle 137° |
 Shank HA with IC |
 Special-polishing process |
 Interior Coolant |
 High Performance Cutting |
 Shrink Fit |
| Ø d1 (h7) mm |
l3 mm |
l2 mm |
l1 mm |
Ø d2 (h6) mm |
Ø d1 (h7) mm |
l3 mm |
l2 mm |
l1 mm |
Ø d2 (h6) mm |
|
| 3 | 75 | 81 | 125 | 6 | 6 | 150 | 162 | 200 | 6 | |
| 4 | 100 | 108 | 150 | 6 | 6.5 | 162.5 | 175.5 | 215 | 8 | |
| 4.5 | 112.5 | 121.5 | 165 | 6 | 8 | 200 | 216 | 255 | 8 | |
| 5 | 125 | 135 | 175 | 6 | 10 | 250 | 270 | 315 | 10 | |
| 5.5 | 137.5 | 148.5 | 190 | 6 |
Recommendation for using the deep hole drills: drilling a pilot hole with HAM 30-1741 or HAM 30-1621
We reserve the right to make technical changes. 