HAM 486   40-5480   40-6130   40-5600   HAM 418 
 40-5460   40-6120   HAM 417   40-5500   HAM 419 

 
 HAM 40-5360 (HAM 417)  solid carbide toric end mill

 Engineering data
 • reduced neck
 • centre cutting
 • radius form tolerance 0.02

Material  
40-5360
    very suitable       limited suitable

tool design and mould
and die production		 cutting material
solid carbide ultra micro grain		 number of teeth - 2 helix angle
28° right hand fluted		 HAM Standard Type for hard materials Machining Direction Cylindrical Shank
Special-polishing process Corner Radius High Speed Cutting Shrink Fit Clamping Fixture

Ø d1/R
(e8)
mm		 l2

mm		 l3

mm		 Ø d3
(Hals)
mm		 l1

mm		 Ø d2
(h6)
mm		   Ø d1/R
(e8)
mm		 l2

mm		 l3

mm		 Ø d3
(Hals)
mm		 l1

mm		 Ø d2
(h6)
mm
0.5/0.05 0.7   2 0.48 45 4   2.0/0.2   2.8 10   1.95 60 4
0.5/0.05 0.7   6 0.48 45 4   2.0/0.2   2.8 15   1.95 60 4
0.6/0.06 0.9   2 0.57 45 4   2.0/0.2   2.8 20   1.95 60 4
0.6/0.06 0.9   8 0.57 45 4     2.5/0.25   3.5   8 2.4 60 4
0.8/0.08 1.2   4 0.77 45 4     2.5/0.25   3.5 15 2.4 60 4
                         
0.8/0.08 1.2   6 0.77 45 4   3.0/0.3 4 10 2.9 60 6
0.8/0.08 1.2   8 0.77 45 4   3.0/0.3 4 15 2.9 60 6
1.0/0.1   1.6   6 0.95 45 4   3.0/0.3 4 20 2.9 65 6
1.0/0.1   1.6 10 0.95 45 4   3.0/0.3 4 25 2.9 65 6
1.0/0.1   1.6 15 0.95 45 4   4.0/0.5 5 15 3.9 70 6
                         
1.2/0.12 1.9   6 1.15 50 4   4.0/0.5 5 20 3.9 70 6
1.2/0.12 1.9 12 1.15 50 4   4.0/0.5 5 25 3.9 70 6
1.5/0.15 2.4   6 1.45 55 4   5.0/0.5 6 15 4.9 70 6
1.5/0.15 2.4   8 1.45 55 4   5.0/0.5 6 20 4.9 70 6
1.5/0.15 2.4 15 1.45 55 4   5.0/0.5 6 25 4.9 70 6
                         
1.5/0.15 2.4 20 1.45 55 4   6.0/0.5 9 32 5.8 75 6
2.0/0.2   2.8   6 1.95 60 4   6.0/1    9 32 5.8 75 6


We reserve the right to make technical changes.

Copyright ©      GP SYSTEM (SINGAPORE) PTE LTD     All Rights Reserved.
No.51 Bukit Batok Crescent    #04-05 Unity Centre    Singapore 658077     Tel: (65) 68612663     Fax: (65) 68613500     Email: enquiry@gpsystem.com