| 40-5350 | 40-1691 | HAM 403 | HAM 445 |
 |
| HAM 40-1681 (HAM 403/406) solid carbide roughing end mill |
Engineering data
• centre cutting • flute with knurling contour • very smooth running
|
 |
| Material |  |
 |
 |
 |
 |
 |
 |
 |
 |
 |
||||
| 40-1681 | very suitable | limited suitable | ||||||||||||
 cutting materialsolid carbide ultra micro grain |
 number of teeth - 3 to 6 |
 helix angle20° right hand fluted |
 HAM Standard |
 Type for hard materialswith roughing serration |
 Machining Direction |
 cylindrical shank acc. DIN |
 High Performance Cutting |
 Shrink Fit |
 Clamping Fixture Weldon |
| Ø d1 (h6) mm |
l2 mm |
l3 mm |
Ø d3 (Hals) mm |
l1 mm |
Z |
Ø d2 (h6) mm |
Ø d1 (h6) mm |
l2 mm |
l3 mm |
Ø d3 (Hals) mm |
l1 mm |
Z |
Ø d2 (h6) mm |
|
| 4 | 8 | — | — | 57 | 3 | 6 | 14 | 26 | — | — | 83 | 4 | 14 | |
| 5 | 10 | — | — | 57 | 3 | 6 | 14 | 26 | 38 | 13.6 | 83 | 4 | 14 | |
| 6 | 13 | — | — | 57 | 3 | 6 | 14 | 42 | — | — | 99 | 4 | 14 | |
| 6 | 13 | 21 | 5.7 | 57 | 3 | 6 | 16 | 32 | — | — | 92 | 4 | 16 | |
| 6 | 18 | — | — | 62 | 3 | 6 | 16 | 32 | 44 | 15.6 | 92 | 4 | 16 | |
| 7 | 16 | — | — | 63 | 3 | 8 | 16 | 48 | — | — | 108 | 4 | 16 | |
| 8 | 19 | — | — | 63 | 3 | 8 | 18 | 32 | — | — | 92 | 4 | 18 | |
| 8 | 19 | 27 | 7.7 | 63 | 3 | 8 | 18 | 32 | 44 | 17.6 | 92 | 4 | 18 | |
| 8 | 24 | — | — | 68 | 3 | 8 | 18 | 54 | — | — | 114 | 4 | 18 | |
| 9 | 19 | — | — | 72 | 3 | 10 | 20 | 38 | — | — | 104 | 4 | 20 | |
| 10 | 22 | — | — | 72 | 4 | 10 | 20 | 38 | 54 | 19.6 | 104 | 4 | 20 | |
| 10 | 22 | 32 | 9.7 | 72 | 4 | 10 | 20 | 60 | — | — | 125 | 4 | 20 | |
| 10 | 30 | — | — | 80 | 4 | 10 | 25 | 38 | — | — | 110 | 6 | 25 | |
| 12 | 26 | — | — | 83 | 4 | 12 | 25 | 38 | 54 | 24.5 | 110 | 6 | 25 | |
| 12 | 26 | 38 | 11.7 | 83 | 4 | 12 | 25 | 75 | — | — | 150 | 6 | 25 | |
| 12 | 36 | — | — | 93 | 4 | 12 |
We reserve the right to make technical changes. 