 |
Mini 111 |
| Insert Ø ≥ 11 mm | |||||||||
 Geometry FB |
 Fine Turning |
||||||||
 |
 |
| R = right hand version shown L = left hand version ▲ on stock ⃤ 4 weeks Carbide Grades | |||||||||||
| Part number | w | s | f | a | r | d | tmax | Dmin | HIS | aaa | EG35 |
| R111.FB10.01 | 1 | 3.95 | 6.7 | 10.7 | 0.1 | 8 | 2.3 | 11 | 111080R | ▲ | |
| R111.FB15.01 | 1.5 | 3.95 | 6.7 | 10.7 | 0.1 | 8 | 2.3 | 11 | 111080R | ▲ | |
| L111.FB10.01 | 1 | 3.95 | 6.7 | 10.7 | 0.1 | 8 | 2.3 | 11 | 111080L | ▲ | |
| L111.FB15.01 | 1.5 | 3.95 | 6.7 | 10.7 | 0.1 | 8 | 2.3 | 11 | 111080L | ▲ | |
Calculation of the smallest possible width of groove wx Example R111.FB10.01 wx = 2 x Width of insert w - 2 x Corner radius insert r wx = 2 x 1 mm - 2 x 0.1 mm wx = 1.8 mm  |
P | ||||||||||
| M | |||||||||||
| K | |||||||||||
| N | |||||||||||
| S | |||||||||||
| H | |||||||||||
We reserve the right to make technical changes. 